It is good to always have a backup scheduler as plan B

The schematic and firmware can be observed here. Abaixo encontram-se imagens da experiência.

USBasp on white card test

And here's a reading to an Arduino with an ATmega 328:

Fuse read Arduino

And at the end… Well, still doesn't work, but I suspect that I made a mistake when connecting something , in this case I chose not to use the protection resistors sauce – NEVER DO!!! – pois não estava minimamente preocupado com nenhuma das duas ATMEGAS.
Quando tiver um bocado de paciência faço e tento novamente recuperar a minha atmega surda.

http://mightyohm.com/hvrescue2

Although not tested, but from what I read, and for the comments of many works well
Tomorrow or in pictures and news I leave already on this…

PS: If you are tired, do not try to do anything that requires good concentration, vão acabar por fazer mer*.

Brevemente vou postar mais sobre este tópico.

With Ethershield barometric sensor

It is so in this case a supplement to previously mentioned Ethershield homemade aqui , onde se p e visualizar a informação da pressão numa página Web.

Web page with add barometric sensor

For more information about this sensor contact me aqui.

&here;

Good! Was to warn that there already exists a tool able to exploit the vulnerability. More info here: http://ptsec.info/forum/showthread.php?21-Vulnerabilidade-que-afecta-Thomson-com-WPS-implementado (have to be registered in order to be able to see the forum topic) or here (in English): http://www.backtrack-linux.org/forums/showthread.php?t=47519&p=213572&viewfull=1#post213572
Greetings

I have not had time to read everything and test, mas com cruzamento de informação é um tópico interessante.

This person's profile: http://www.backtrack-linux.org/forums/member.php?u=192

In recent days I finished another phase in the development of meteorological stations, each time they are more complete and complex and to operate with fewer problems (in view of the lack of development of €, is running fine) Soon I will write an article about them…

If anyone is interested in relieving myself from this server costs, who me contact, in return I offer space for site host

Miguel Ferreira

Simple charger and power supply… The circuit is based on LM317 as voltage source (adjustable to a fine-tuning of load voltage)

The circuit is simple, but due to the currents involved used a perforated plate more robust (our offer of heading eng Electronics ).

For those who wonder the motive being to use only 1 Schema TIP32, simple just not to complicate, because on the Board are to be at least 4 to support the current that in this case I need, could use another transistor, but because you cannot find 3 different for higher currents, decidi-me usar este que alem de custar pouco é muito fácil de encontrar para comprar.

As is obvious to this charger thank Fabio for help .

 

According to them, all services have a guaranteed uptime 99.9% – A huge lie – My machine had an uptime of less than 90% (at home I have better)

This simple post only serves as negative publicity to the worst host I have ever had the pleasure to pay and, Besides the machine constantly losing connection, net connection was slow, normally the maximum that could was a measly 600kapas per second…

Missing 2 days to have to make payment of the annuity, I tried to get in touch with their support, a few days later was told the ticket (that I scored as urgencia) and say it was all ok to test the server, I was impossible because once again it was off, I returned the answer and today, past one 4 or 5 days the ticket was closed for inactivity without me were given a reply…

Final evaluation: -1 (0 the 20) – Don't have decent customer support, don't have decent services, There are a number of free services to pay better than this!

 

The aim is to use an LCD from a Nokia 3510 connected to a microcontroller for information visualization, as done in previous experience, num LCD de um Nokia 1100.

It is assumed that this controller is prepared both for the LCD 3510 ( screen with shades of gray), as well as the 3510i (the colors), According to this site.

Look for the welds made in contacts. It is a meticulous and work something that quite calm, as well as a low power   iron(14W) so as not to damage the contacts and the plastic membrane  .

LCD flat cable soldier

The more painstaking task is the flat cable to the lcd base, requiring a magnifying glass, estanho fino e evitar maus contactos nas soldas.

Having said that, passes-if the programming that involves adapting the source code of a pic16F628 this source,  to a 18F2520, for another compiler opensource, the SDCC. When writing and making connections, the LCD does not start or displays nothing, having regard to any possible breakdowns and the despistado LCD displays a 9mA consumption. Fact is that in another page, It is mentioned that the display driver is a PCF8814, which search relates to the Nokia 1100, mencionado num artigo anterior.

Then is applied the firmware of nokia 1100 and immediately Gets the visual feedback of the text :

PIC18F + LCD 3510